Active PoE

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

Internal PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

The GPeR unit allows to extend Ethernet cable by additional hop (

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent pro

Outdoor PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

Cambium Networks radios utilize PoE (Power over Ethernet) for delivering power and data. This PoE power supply has an AC input and a Data Input which then drives a 30V power plus data( PoE) output to the radio. This PoE power supply meets stringent Lev

Cable extender equipped with TransPort connectors is intended for coupling UISP TransPort cables in outdoor. Mounting is possible to the mast / pole with diameter 35mm - 60mm.

Hot Pluggable; MSA Compliant; RoHS Compliant; Standards; Compliance with IEEE802.3ae, 10GBASE-LR; Form Factor Type: SFP+; Fibre Channel FC-PI standard: 1200-SM-LL-L; Fiber Media support: Single-Mode; Distance Capacity: 10Km; Speed; 10Gbps; Interface; D...

10GBase-LR SFP+ Transceiver, 10km - tray of 10; - Without DDM; DEM-432XT je vysoce výkonný 1310nm single-modový 10G SFP+ transceiver s dosahem až 10km. Podporuje full-duplexní 10-gigabitové rychlosti na jednovidových (singlemode, SM) optickách vláknech...

10GBASE-SR SFP+ Transceiver (without DDM), 80m: OM1 & OM2 MMF,300m: OM3 MMF

10GBase-SR SFP+ Transceiver, 80/300m - tray of 10; - Without DDM; - 80m: OM1 & OM2; - 300m: OM3; DEM-431XT je vysoce výkonný 850nm multi-modový 10G SFP+ transceiver s dosahem až 550m. Podporuje full-duplexní 10-gigabitové rychlosti na mnohovidových (ví...

1-port Mini-GBIC SFP to 1000BaseLX, 10km for all - tray of 10; - Mini GBIC to 1000BaseLX Single-mode Fiber Transceiver; - Distance up to 10km; - Suitable for all D-Link switches with Mini GBIC slots; DEM-310GT je vysoce výkonný 1310nm single-modový SFP...

1-port Mini-GBIC SFP to 1000BaseSX, 550m for all - tray of 10; - Mini GBIC to 1000BaseSX Multi-mode Fiber Transceiver; - Distance up to 550m; - Suitable for all D-Link switches with Mini GBIC slots; D-Link SFP (Small Form-Factor Pluggable) transceivery...

LC 1000 Mbit optický LX port (standard IEEE 802.3z); Plně duplexní provoz 2000Mbit; 802.3x podpora Flow-Control; Výměna za provozu; IEEE 802.3z; IEEE 802.3x Flow-Control; Jednovidové vlákno 9/125µm až 5 km; Mini GBIC transceiver, 1000BaseLX (LC-Duplex)...

1x 1000 Mbit optický SX (LC-Duplex) port; Plně duplexní provoz 2000Mbit; 802.3x podpora Flow-Control; Výměna za provozu; IEEE 802.3z; IEEE 802.3x Flow-Control; Vícevidové vlákno 62,5/125µm až 220 m; Vícevidové vlákno 50,0/125µm až 550 m; Mini GBIC tran...