Active PoE

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

MaxLink PI60 is a high quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 60W. For better current load distribution, all 4 pairs of conductors are powered. The

Internal PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

The GPeR unit allows to extend Ethernet cable by additional hop (

MaxLink PI15W is a high quality Gigabit POE injector with PoE output port for powering 802.3af-enabled devices with a maximum power consumption of up to 15.4W. The power supply is conducted on wires 4.5 (+) and 7.8 (-). The power injector is esp

TL-POE160S is a very robust Gigabit power PoE injector that supports 802.3af/at standards with power up to 30W, which is a suitable solution for powering most IP cameras, VoIP, WiFi AP and other devices. The injector has an LED indication

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SG3424P, TL-SF1008P or TL-POE150S, or other equivalent pro

Outdoor PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK’s TL-POE10R, or other equivalent product, to expand your netw

USB converter serve to powering any device by USB port. Its converting 802.3af PoE to 5V/2A with 10W maximum load. Example of installation Important note: converter does not convert data from Ethernet to USB, but only power

TL-POE170S is a very robust Gigabit power PoE injector that supports 802.3af/at/bt standards with a power of up to 60 W, which is a suitable solution for PTZ power supply cameras, LED panels, more powerful Wi-Fi APs and other devices. The

MaxLink MAXPI15FE is a very simple 100Mbps PoE injector with one output POE port to power devices with 802.3af support with maximum consumption up to 24W, output voltage 48V and current 0.5A. The ma

MaxLink PI30 is Gigabit PoE injector of white color with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. Po

MaxLink PI90 is a high-quality Gigabit POE injector with one POE output port for powering 802.3af/at/bt devices with maximum power consumption up to 95W. For better distribution of the current load, all 4 pairs of conductors are powered. Can als

Cambium Networks radios utilize PoE (Power over Ethernet) for delivering power and data. This PoE power supply has an AC input and a Data Input which then drives a 30V power plus data( PoE) output to the radio. This PoE power supply meets stringent Lev

MaxLink MAXPIDIN60 is an active DIN rail mounting PoE injector with DC power input from 12 to 48 V and built in power converter. The output of this power supply is 1Gbit port with support of the 802.3af/at (55 V) which is dedicated for Wi

MaxLink MAXPIDIN60F is an active DIN rail mounting PoE injector with DC power input from 12 to 57 V and built in power converter. Injector has one POE LAN port output and one SFP port output. The output of this power supply is 1Gbit port with su

Hi-PoE injector RG-POE-50-60W-MG from Ruijie provides reliable power for network devices with 802.3bt support standard, with power of 60 W at a distance of up to 100 meters with a speed of 2.5 Gbps.

The PoE+ Injector TL-POE260S fully complies with IEEE 802.3af/at standards, and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) or other equivalent product, to expand you network to where there are no power line or outlet, where y

The Omada 10G PoE++ injector allows you to transmit data and power your devices with a single cable. It includes 1 LAN port with 10Gbps speed as output with PoE and 1 LAN port with 10Gbps speed for input connection. It is fully compliant with 802.3bt/a

Product description prepares.

Cambium Networks - 5GbE PoE injector N000000L142A is a high-quality 5GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such a

Cambium Networks - 10GbE PoE injector C000000L141A is a high-quality 10GbE PoE injector with one PoE output port for powering devices with voltage level of 56V with a maximum output power of 60W, which is sufficient for the devices such