Ubiquiti AirFiber AF-24HD, 2Gbps+ Backhaul, 24GHz (price per piece)
Oversized transport - The shipping price will be calculated after receiving the order. Shipping price may vary depending on your delivery adress.
Your price excl. VAT
2 784.48 EUR
| Recycling fee | 0.07 EUR |
|---|---|
| Your price with RF | 2 784.55 EUR |
| Your price incl. VAT (21%) | 3 369.31 EUR |
| blank |
Availability
at our branches
at our branches
Per orig. box:
1 piece
| Manufacturer |
Ubiquiti |
|
|---|---|---|
| Code | 10900140 | |
| Part No. | AF-24HD | |
| Warranty | 24 months | |
You have a choice of 2 variantscompare all
2Gbps+
AF-24HD
2 784.48 EUR
KC40P60V50Z
40.73 EUR excl. VAT
49.28 EUR incl. VAT
In Stock
K25P60V2Z40
42.19 EUR excl. VAT
51.05 EUR incl. VAT
Ordered, unknown date
POE-50-60W
25.53 EUR excl. VAT
30.98 EUR incl. VAT
Ordered, unknown date
F-POE-G2
26.68 EUR excl. VAT
32.37 EUR incl. VAT
Expected 30.8.2024
POE-54V-80W
25.53 EUR excl. VAT
30.98 EUR incl. VAT
In Stock
PCU5E-1YW-MS
0.57 EUR excl. VAT
0.69 EUR incl. VAT
In Stock
PCU5E-5-MSC
3.13 EUR excl. VAT
3.79 EUR incl. VAT
In Stock
Parameters
Download
Video
Technical parameters
Wireless features
Polarization:
VH
Sensitivity [dBm]:
-87
F/B ratio [dB]:
70
Cross-Pol Isolation [dB]:
28
Frequency range [MHz]:
24050 - 24250
Maximum modulation:
256 QAM
Channel bandwidth [MHz]:
100
Transmission speed - 24GHz [Mb/s]:
1024
Tx power 24GHz [dBm]:
33 (FCC/IC), 20 (CE) - EIRP
Security:
WPA2 AES
Elevation beam width (-6dB) [°]:
3,5
Azimuth beam width (-6dB) [°]:
3,5
Antenna gain [dBi]:
Tx = 33, Rx = 40
Connectors and Interfaces
LAN speed:
(1) 10/100/1000Mbps + (1) 10/100Mbps (managment)
GPS modul:
Yes
Other features:
RJ-12 - Alignment Tone Port
Power
Power over Ethernet:
42 .. 58V DC
Max. power consumption [W]:
50
Physical characteristics
Designed for mast diameter [mm]:
30 up to 100
Wind load [km/h]:
200
Radom:
Yes
Operating temperature [°C]:
-40 up to 55
Weight [g]:
17300
Width [mm]:
593
Height [mm]:
768
Depth [mm]:
370
Software
Operating system:
airOS F
Default IP address:
192.168.1.20
Default login and password:
ubnt / ubnt
Product description
Featuring the world’s best unlicensed-band spectral efficiency at 15.9 bps/Hz, the airFiber®24 HD supports the dense modulation rates, up to 256QAM, that are required for high data rates, up to 2 Gbps.
2 independent antennas
airFiber features a dual-independent, 2x2 MIMO, high-gain reflector antenna system. Separate yet integrated transmit ( TX) and receive (RX) antennas help extend link budgets by eliminating the extra RF losses caused by the switches or duplexers required in systems with common TX/RX antennas.
FDD and HDD
Conventional wireless standards impose a latency by having to receive a packet before a packet is transmitted. airFiber can transmit data synchronously without any wait time. airFiber features traditional TDD and FDD modes of operation in addition to the proprietary Hybrid Division Duplexing (HDD) mode, which provides a breakthrough in range and spectral efficiency performance.
Based on the ranging algorithm built into the air protocol, the airFiber radios use patent-pending HDD technology to calculate the propagation delay and know when each radio can transmit and receive, so they send packets in precise synchronization. Packet transmission latency is virtually eliminated.
2 Ethernet ports
For seamless monitoring and settings is used in the unit 2 Ethernet ports, one of whom is designed only for management 2nd one for data and management.
Package contains
Download
CE Datasheet Latest Firmware Návod k použití Quick Start GuideTechnical support for this product is available on rma@discomp.cz email or sending a request via web form. Our technical support is available during this business hours.
Bussines information
Dan Pacanda, +420 377 221 177 , dan.pacanda@discomp.cz