Powering

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

Parametry: Konektory: F2; Napětí: 12V; Kapacita: 5Ah; Rozměry (d x š x v): 90 x 70 x 102mm; Rozměrové tolerance: 90(+1-1) x 70(+1-1) x 101(+1-1)mm; Hmotnost: 1,62kg; Elektrolyt: AGM; Typ akumulátoru: HighRate; Životnost: 3-5 let (dle normy Eurobat nebo...

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.3A. The maximum output power is 7W. Suitable for these products LBE-5AC-23 LBE-5AC-Gen2b

High-quality, stabilized white Gigabit PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.32A. The maximum output power is 15,4W.

The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires

The USW-Lite-8-PoE is a fully managed Layer 2 switch with 8 Gigabit Ethernet ports for your RJ45 Ethernet devices. Four ports also offer auto-sensing 802.3at PoE+ that provide upto a total PoE wattage of 52W for UniFi Access Points or oth

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains PoE adapter Power cord

U-POE-at from Ubiquiti is a high-quality Gigabit PoE injector with one PoE output port for powering devices with voltage level of 48V with a maximum output power of 30W, which is sufficient for the latest devices such as U6 Acc

48V 2A 96W power supply, to be used with MikroTik products that support 48V POE output, like hEX PoE and CRS112-8P-4S-IN. It’s providing 30% more current than the old model 48POW (48V 1.46A 70W), allowing more power per port. Co

OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, MikroTik devices with input voltage 48V DC. The power adapter has a maximum power 96W and a maximum output current 2A. A power cord is als

Outdoor PoE extractor for powering most RouterBOARDs or Ubiquiti devices. It is a converter from active power supply designated as 802.3af to passive PoE 18V/0.7A with a maximum load of 12.8W.

Teltonika 2m power supply cable terminated at one end with a 4-pin connector and at the other end with a screw terminal block. The cable is primarily intended for powering the following Teltonika devices: RUT230

High-quality, stabilized PoE power adapter with earthing, LED indication and output voltage 48V and max. current 0.5A. The maximum output power is 24W. Package contains PoE adapter Power cord

A compact, 8-port, Layer 2 GbE PoE switch with versatile mounting options. The switch has 1 PoE in port and 7 PoE out ports with PoE 802.3af/at with max wattage 30W per port. Switch is managed by UniFi network providing central man

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, shorter LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum po

RBGPOE-CON-HP serves as a converter of any 48V PoE source (passive PoE, Telecom PoE, 802.3af and 802.3at) to passive 24V PoE, for example for powering RouterBOARD devices. The PoE converter supports 10/100/1000Mbps. The maximum output power is 24W.

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum power 60W and a maximum output current 5A

Ubiquiti UniFiSwitch US-8-150W Gigabit PoE switch in desktop / rackmount design with maximum PoE power 150W. Manageable switch with 8 Gigabit metallic + 2 Gigabit SFP ports and total throughput 20 Gbps. PoE setup on each port

The USW-Flex supports a maximum PoE output budget of 46W when powered by 60W 802.3bt PoE++. Four ports offer auto-sensing 802.3af PoE output to power multiple devices on the network. Versatile Mounting The USW-Flex can be installe

Lead-acid battery with 12V and 9Ah capacity. The battery is equipped with two Faston 6.3mm connectors to connect to the device. Estimated battery life is 10 years depending on installation conditions and battery usage.

Outdoor PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

USW-16-POE is a configurable Gigabit Layer 2 switch with 16 Gigabit Ethernet ports including eight auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink opti

PSBT-10-8P-250 is a 10 port 10/100Mbps PoE switch without management. Automatically detects and powers devices supporting PoE standard 802.3af/at (max. 30 W port) on ports 1 to 8, on port 1 it even supports PoE standard 802.3bt (60

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 1A. The maximum output power is 24W. Package contains (5) PoE adapter (5) Power cord

Internal PoE converter for powering most RouterBOARDs or devices from Ubiquiti with a gigabit LAN port. It is a converter from active power supply known as 802.3af to passive PoE 24V/0.5A with a maximum load of 12W.

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 24W and a ma

USW-24-POE is a configurable Gigabit Layer 2 switch with 24 Gigabit Ethernet ports including 16 auto-sensing 802.3at PoE+ ports, and 2 SFP ports. It provides Gigabit PoE links to your RJ45 Ethernet devices and Gigabit fiber uplink options

High-quality, stabilized Gigabit PoE power adapter with earthing, LED indication and output voltage 24V and max. current 0.5A. The maximum output power is 12W. Package contains (5) Gigabit PoE adapter (5) Power co

The second generation UniFi switches bring many changes and improvements, the switches have been redesigned from the ground up. Compared to the first generation, there is a significant improvement in airflow, which is used for cooling, ma

MikroTik netPower Lite 7R is a reverse PoE switch with 8x Gigabit ethernet ports, two SFP ports, DC power connector, DC terminal and SwOS operating system. The first 7 LAN ports allow power through PoE IN and 8th port supports PoE out