Products marked as: "Recommended"

Set for mounting the antenna holders and distributors on the wall - 10mm. Package contains (4) Screw with a hexagonal head - 6 x 70mm - (zinc material) (4) Plastic dowel - 10 x 60mm - universal

Stožár teleskopický dvojdílný (2x2 m) o průměrech trubek 48 a 57 mm; s maximální výškou po vysunutí 3,75 m a čtyřmi šrouby pro zajištění vysouvané části. Váha 10 kg. Povrchově upraveno galvanickým zinkem.

Nástavec na stožár o průměru 38mm, výškou 60cm, vinklem a dvěma třmeny, určený pro antény TV, SAT a WIFI. Nástavec má povrchovou úpravu galvanickým zinkem a je určený pro montáž na stožáry o průměru 20 až 48mm.

UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.

Délka plocháče pro zajištění pod tašku: 550mm, Výška: 400mm, Průměr trubky: 35mm, Povrchová úprava: galvanický zinek, Hmotnost: 0,80kg

Stupačka na stožár jednostranná s celkovou délkou 150mm od upevňovacího třmene. Stupačku lze uchytit na tyč o průměru 40 až 67mm. Povrchově upraveno galvanickým zinkem.

Stožárová trubka o délce 2m , sílou stěny 2mm, průměrem trubky 48mm s povrchovou úpravou žárového zinku. Stožárová trubka je určena pro uchycení antén.

Anténní držák na stožár typu "L", 20cm dlouhý, 20cm vysoký s jedním třmenem k uchycení na stožár. Povrch držáku je upraven galvanickým zinkem. Obsah balení; Protikus - tl.materiálu 3mm; (2) vratový šroub 10x120mm závit 60mm; (2) podložka; (2) matka; Hm...

Mounts poles from 28 - 42mm in diameter. Package including two 5m steel straps. This straps a pole or mast to the chimney without drilling. Chimney mounts require no drilling. This means no holes in your chimney or a roof. Total weight

Držák antén 35cm dlouhý, 25cm vysoký (venkovní hrana) s jedním třmenem k uchycení na stožár a průměrem trubky 42mm. Povrch držáku je upraven galvanickým zinkem.

MikroTik OEM power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example, shorter LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum po

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 48W and a maximum output current 2A

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 96W and a maximum output current 4A

Panel integrating 6 passive Gigabit PoE injectors into a single panel. Professional solution for remote power supply of a large number of active elements with support for passive PoE. By adding this walk-through panel, you get a pow

Passive PoE set of injector and extractor used to power most RouteBOARDs. It is a 100Mbps cable variant that can be used to power any device with a corresponding input power connector. The PoE set does not meet the IEEE 802.3af/at specifi

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, LED strips or MikroTik devices with input voltage 12V DC. The power adapter has a maximum power 60W and a maximum output current 5A

MaxLink PI30 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af/at with maximum power consumption up to 30W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is s

MaxLink PI15 is Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires. PoE injector is su

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

Masterlan DROPX is fiber optic drop cable suitable for both indoor and outdoor use. Used fibers are high quality Corning (G.657.A2) with perfect flexibility. Aramid yarn serves as strength and protective member. The Cable is completed with LSZH and UV

MaxLink PI15S is high quality Gbit POE injector with 1 POE Out eth port for devices which support 802.3af. It provides 15,4W. Plug injector directly to socket. Powering through 4,5(+) and 7,8(-). It is suitable especially for IP cams, VOIP phone

Masterlan duplex optic fibre coupler for LC connectors with APC endface polishing, singlemode. It is used to connect, for example, two optic fibre patch cords.

Masterlan splice protection 60mm long, 2.2mm diameter and 1mm steel reinforcement to accommodate most optical cassette combs.

Hikvision DS-1280ZJ-S mounting box is designed for Hikvision TurboHD and IP cameras. The mounting box is made of aluminum and is painted white. Compatibility list DS-2CD2Txx DS-2CD26xxF-I DS-2CD22xx-I5

DS-7608NI-K2 NVR device for recording up to 8 IP cameras. It can record camera recordings in a maximum resolution of up to 8Mpx . The device can be connected to the network by one Gigabit LAN port. There are 2 USB ports (1x USB 2.0, 1x USB 3.0)

Holder for Uniview bullet cameras from the IPC21x, IPC22x, IPC23x, IPC24x, IPC252, IPC26x and IPC74x series designed for mounting on a pipe, mast or pole.

Uniview TR-JB03-G-IN is a wall or ceiling junction box designed for DOME camera models like IPC32x, IPC31x and IPCD1XX series. The mounting box is made of aluminum alloy and is covered with white color. This mounting box is prepared for the so-called p

Uniview TR-JB04-C-IN is a wall or ceiling junction box designed for DOME camera models like IPC32x. The mounting box is made of aluminum alloy and is covered with white color. This mounting box is prepared for the so-called pendant mount, ie. pole moun

test; IP kamera v provedení Turret , která disponuje 2MP snímačem (1920 x 1080, 30 fps), fixním objektivem s ohniskovou vzdáleností 2.8mm , pozorovacím úhlem 113°, IR přísvitem pro noční vidění na vzdálenost až 30m , 120dB true WDR proti přímému světlu...

IP kamera v provedení Bullet , která disponuje 4MP snímačem (2688 x 1520, 30 fps), variofokálním motorizovaným objektivem s ohniskovou vzdáleností 2.8 - 12mm , pozorovacím úhlem 31 až 103°, IR přísvitem pro noční vidění na vzdálenost až 40m , 120dB tru...