IoT Technology

Bluetooth tags play a huge role in IoT setups, where Bluetooth is used to broadcast the data over short distances. You can use these small devices for proximity-based tracking of various objects. For example, if you have a KNOT gateway in

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses Narrow Band and CAT-M technology. Because of the low cost, low bandwidth cellular connection, it is supp

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

wAP LoRa8 – an out-of-the-box solution to use LoRaWAN gateway. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet port

LtAP LR8 LTE kit (2024) equipped with a new LTE modem is a compact and robust wireless access point with support for LTE Cat6, LoRa network, LAN, GPS, USB and serial port for debugging. The perfect device for noisy urban environments as well as

This version of our BLE tags comes completely sealed, cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words, this tag is dust-tight – nothing gets in, and it is fully protected against close-ran

MikroTik is bringing you new, powerful LoRa products for the fraction of the cost you would expect. R11e-LoRa8 is a new LoRaWAN concentrator Gateway card in mini PCIe form factor based on Semtech SX1301 chipset. It enables LoRaWAN connectivit

Inside the heavy-duty case, there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port, built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem, the other one is populated with the co

Thanks to the miniPCIe card R11e-LR2, you can connect any MikroTik device to the LoRa network that has a slot for placing a miniPCI-e card. The card supports 4 different Rx channels from the 2.4 GHz frequency band (2403 MHz,

2.4GHz LoRa omnidirectional antenna with 8 dBi gain for the 2400 - 2500 MHz band with one SMA female connector and 55cm height. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole wi

LoRa omnidirectional antenna with 6.5 dBi gain for the frequency band 900 to 928 MHz with one SMA female connector and IP66 protection. The package includes a removable 1m long pigtail with SMA male

KNOT is a truly universal device with a wide range of connection options and support for protocols and interfaces. It is an IoT Gateway that uses LoRa technology (902 - 928 MHz) but also Narrow Band and CAT-M b>, which a

The CME Gateway is a rugged and affordable CAT-M LTE modem designed for connecting sensors and IoT devices to the mobile network. The modem provide LTE Cat NB2 and LTE Cat M1 extremely efficient, low-cost, low-bandwidth mobile internet co

MikroTik is bringing you new, powerful LoRa products for the fraction of the cost you would expect. R11e-LoRa9 is a new LoRaWAN concentrator Gateway card in mini PCIe form factor based on Semtech SX1301 chipset. It enables LoRaWAN connectivit

wAP LR9 kit – an out-of-the-box solution to use LoRa® technology. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa® servers and an outdoor weatherproof wireless access point with 2.4 GHz WLAN interface and Ethernet p

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses LoRa (863 - 870 MHz), Narrow Band and CAT-M technology. Because of the low cost, low band