Accessories
Ubiquiti case for UAP nanoHD, U6 Lite a U6+, Concrete Design, 3-Pack
nHD-cover-Concrete-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Concrete design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-
RF elements Twin Horn Bracket
Twin Horn Bracket allows you to install two symmetrical Horn antennas with exactly the same alignment. The bracket also accommodates mainstream 4x4 radios, such as ePMP™ 3000 or Mimosa® A5c. High density sectors or 4x4 deployments are now ingeniously s
UbiBracket universal adjustable bracket for wall or pole for all Loco and NanoStation
UbiBracket is universal positioning mount for mast or wall for all NanoStation and Loco devices. The holder can be attached to a pipe up to a diameter of 60mm.
Ubiquiti PAK-620 Precision Alignment Kit, for RD-5G30-LW, AF-5G30-S45, PBE-5AC-620, PBE-M5-620
Precision Alignment Kit to better attach the antenna. Precision two-axis alignment enhances beam directivity for maximum PtP or backhaul performance. Applies to the following models airFiber®AF-5G30-S45 PowerBeam ™
Ubiquiti case for UAP nanoHD, U6 Lite a U6+, Black Design, 3-Pack
nHD-cover-Black-3 is a set of 3 covers for UAP-nanoHD, U6 Lite, U6+ and *UAP-AC-LITE with Black design. For demanding customers is available up to 6 optional skins allow the UniFi AP to blend into its surroundings. Cover for UAP-AC-LITE i
Turris mini PCIe Module, Wi-Fi 6 11ax 4T4R
The Dual Band WiFi 6 card model AW7915-NP1 features a miniPCI-e interface with 4 × u.Fl connectors, supporting WPA3 encryption and modulation speeds of 2401 Mbps in the 5 GHz band (4×4) or 574 Mbps in the 2.4 GHz band with
Ubiquiti WM-W, WiFiMan Wizard spectrum analyzer
WiFiMan Wizard is a portable spectral analyzer designed for the WiFiMan iOS and Android mobile application with which it communicates wirelessly via Bluetooth. Together with a Lidar-equipped smartphone, it is able to project t
Turris Omnia rack mount
RTROM01-RM is a set of two metal mounts intended for mounting the Turris Omnia 2020 in a 19" rack. Due to a different mount it is not possible to use this rack mount kit also for the Turris Omnia 2019. Double-sided router mounting T
Turris Omnia black housing
Turris Omnia RTROM01-CB is a black box as an alternative to silver, supplied as standard with Turris Omnia routers. The box is made of metal material and is divided into bottom and upper part.
Turris MOX housing spare connecting plastics
RTMX-N-001-prt-005 is a set of two pieces (bottom and top part) of spare connecting plastics in the shape of hexagons, which connect the individual parts / modules of the Turris MOX router.
Ubiquiti Quick-Mount for Ubiquiti CPE Products
Toolless Quick-Mounts for Ubiquiti CPE Products. Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design. Features No tools r
Ubiquiti InWall Junction Box for UAP-IW-HD, 25-pack
Plastic inwall juction box is suitable for installation of UniFi AP In Wall HD (UAP-IW-HD). The mounting box has several holes on the back side for attaching or inserting the Ethernet cable. The box also has 2 pillar for attach UAP unit. The
Ubiquiti 60G-PM Precision Alignment Mount for AF60 and GBE-LR
The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.
Cambium Networks Pole Mount Bracket for cnWave V5000
Mast holder without tilt, mast diameter 25 - 77 mm, for Cambium's cnWave V5000 units
Cambium Networks cnWave Precision Mounting Bracket for V3000
The Precision Mounting Bracket is used to mount the cnWave V3000 Client Node on a vertical pole, providing fine adjustment up to 18° in azimuth and +/-30° in elevation for accurate alignment of the V3000. The Precision Bracket is compatible with pole d
Cambium Networks Telescope mounting kit
Cambium Networks telescope mounting kit for precision brackets An alignment telescope provides the most accurate option for alignment of the precision bracket during installation. The telescope is temporarily mounted on the bracket using the
Cambium Networks cnWave V5000/V3000/PMP450i/PTP 550(E) Tilt Bracket Assembly
Cambium Networks cnWave V5000,V3000 / PMP450i/PTP550(E) Tilt Bracket Assembly. The universal mounting bracket fitting to cnWave V5000,V3000 and PMP450i, PTP550(E) products.
Turris Omnia LTE Kit
With the help of the Turris Omnia LTE kit your Omnia will be able to connect to connectivity using LTE category 6, enabling a transfer rate of 300/50 Mbps (Down/Up). The kit is built on a miniPCI card with a Quectel EP-06 modem
Turris miniPCI-e WiFi 5GHz card for MOX and Omnia
WiFi card RTROM01-WS3294 is a wireless miniPCI-e card with 4× u.Fl connectors, support for WPA2 encryption, modulation speed up to 1733 Mbps in the 5GHz band (4×4 MU -MIMO) or 600 Mbps in the 2.4GHz band (4×4 MU-MIM
TP-Link D-M5 Wallmount holder for DECO M5, white
The holder is designed for attaching TP-Link Deco M5 and P7 wireless units to a ceiling or wall using a single screw. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-M4/E4 Wallmount holder for DECO M3/M4/E4/P9, white
The holder is designed to attach TP-Link Deco E4 and M4 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer in a white colour.
TP-Link D-Halo Wallmount holder for Halo H50/H30/S12/S3, white
The plastic wall mount is designed to mount Halo H50 / H30 / S12 / S3 Mesh Access Points from Mercusys. The holder is made using 3D printing, has a white color and its dimensions are 123 × 40 × 91mm.
TP-Link D-X20/X60 Wallmount holder for DECO X20/X50/X60, white
The holder is designed to attach TP-Link Deco X20, Deco X50 and X60 wireless units to the wall using two screws. The holder is made of PETG material on a 3D printer and the colour is white.
TP-Link D-TP100 Rackmount holder for OC200/SF1005xx/SG105xx/SG1005xx, gray
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
TP-Link D-TP158 Racmount holder for SG108xx/SG1006P/ER605/RP108GE, gray
The plastic holder is designed to hold selected TP-Link products (see below) in 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other. The internal dime
D-CKG2+ Rackmount holder for UCK-G2-PLUS, gray
The plastic holder is designed to mount the UCK-G2-PLUS from Ubiquiti to 19" and 10" racks. In the case of mounting in a 19" rack, it is possible to mount on the right, left or two holders next to each other.
Ppigtail cable U.FL/U.FL (IPEX) 10,5 cm
The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig
Pigtail cable U.FL/U.FL (IPEX) 15 cm
The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig
Pigtail cable U.FL/U.FL (IPEX) 20 cm
The connecting cable is primarily intended for Turris Omnia wi-fi modules to connect with a diplexer and an external antenna. However, it can also be used with other devices that operate at a maximum frequency of 6 GHz VF cable reduction (pig
TP-Link D-EAP2X Holder for EAP devices EAP225, EAP245 and EAP265, white
The plastic holder/stand is designed to mount selected TP-Link EAP products (see below) on a table or wall. 3 holes are made in the base measuring 83 × 100 mm to attach the bracket to the wall. The overall dimensions of the holder are