Wireless

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The P10 license has a speed limit of 10 Gbit for uploading to the interface and the lossy parameters are based on

The Cloud Hosted Router (CHR) license is designed for installation in a virtual environment (VMWare, Hyper-V, VirtualBox, KVM and others). The PU license does not have a speed limit, other parameters are based from the L6 license. Minimum

Dual-band 2.4GHz / 5 GHz screw-on outdoor antenna with RP-SMA Male connectors. Provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band. Just add two of HGO-antenna-OUT to NetMetal ac2 to have powerful Dual-Band Outdoor AP!

LtAP LTE6 kit is a compact 4G (LTE) capable weatherproof wireless access point – perfect for busy urban environment or off-the-grid outdoors networking. It has a built-in CAT6 cellular modem that supports 4G (LTE) connectivity out of the box – with up

LDF LTE6 kit is a very specific outdoor LTE receiver with IP68 protection and designed for mounting on a satellite dish instead of the original LNB radiator with 40mm mounting. The gain of the whole set can be increased by using a 100cm dish up to 30dB

Inside the heavy-duty case, there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port, built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem, the other one is populated with the co

mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the include

Kit contains two SFP+ modules that can be used as a pair to achieve operating data rate up to 25 Gbps for distances up to 15km on a single optical cable. SFP/ SFP+/ SFP28.

Outdoor AC/DC power supply in a durable metal chassis with output voltage 53 V, max. output current 4.7 A, total power 250 W suitable for a series of netPower products from MikroTik. The chassis is IP67 certified with extra protec

GESP+POE-IN is a passive Gigabit PoE injector with integrated Ethernet surge protection with one Ethernet port and on the other side is cable with RJ45 connector and ground cable terminated with a loop. This version is intended for indoor use on

KNOT is a truly universal device with exceptional connectivity options and protocol support. It is an IoT Gateway that uses LoRa (863 - 870 MHz), Narrow Band and CAT-M technology. Because of the low cost, low band

No need to buy several antennas for your Internet-of-things setups – just grab the new HGO-LTE-W antenna that can handle an impressive frequency spectrum 699MHz – 3,8GHz. That’s right – you can use the same antenna for LTE, CAT-M/NB and LoRa con

LoRa omnidirectional antenna with 6.5dBi gain for the 824 - 960MHz band with one SMA female connector and IP66 protection. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole with a

CRS310-1G-5S-4S + OUT or netFiber 9 is an outdoor optical switch router without a fan, with IP54 certification and a full-fledged RouterOS operating system with L5 license but and SwOS thanks to Dual boot. The switch contains 4x SF

wAP LoRa2 is a complete out-of-the-box solution for use as a gateway to a LoRaWAN network. The device includes a pre-installed R11e-LR2 module for forwarding UDP packets to any public or private LoRa server, 1 RJ45 Ethernet port

Thanks to the miniPCIe card R11e-LR2, you can connect any MikroTik device to the LoRa network that has a slot for placing a miniPCI-e card. The card supports 4 different Rx channels from the 2.4 GHz frequency band (2403 MHz,

2.4GHz LoRa omnidirectional antenna with 8 dBi gain for the 2400 - 2500 MHz band with one SMA female connector and 55cm height. The package includes a detachable 1m long pigtail with SMA male tips and a holder for mounting on a pole wi

CCR2004-16G-2S+ comes with two hot-swap dual redundant power supplies. If one of them goes out of order at some point, the other one will take over. Then you can use this kit to replace the old power supply – and you don’t even have t

CCR2004-1G-2XS-PCIe is a very smart and standalone router with RouterOS installed with L6 license and powered by your server or computer with its own computing CPU 1.5GHz clock and 4 cores for firewall, access control for home multimedia and file serve

XQ+BC0003-XS+ is a QSFP28 to 4x SFP28 break-out cable. This addition to the MikroTik 100 Gigabit product line allows you to connect multiple 25 Gigabit devices to your CRS504 or CCR2216. With the integrated SFP28 modules, conne

XQ+85MP01D is a Multimode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels of 25 Gbps, one 12-fiber MPO connector for connection up to a distance of 100 m. The module is compatible with all active elements from M

Be prepared for the unexpected with the backup hot-swappable fans for our newest devices, such as the flagship CCR2216! If your fans go out of order at some point, you can swap them without unnecessary downtime, as there is no need to turn the router o

An advanced pole/mast mount adapter for our LDF series – for extra ease of use and versatility. There are two standard mounting options and additional QMP compatibility for mounting LDF on a wall. The adapter offers extra durability due to its unique p

XQ+31LC02D is a Singlemode QSFP28 module with a maximum throughput of 100 Gbps, 4 channels, wavelengths 1271nm, 1291nm, 1311nm, 1331nm and two LC connectors for connections up to a distance of 2 km. The module

The XQ+CM0000-XS+ adapter is the perfect accessory for CR504, CRS518, CRS510 switches and other devices with QSFP28 (100Gbps) or QSFP+ (40Gbps) ports. Thanks to this adapter, lower speed modules can be used in higher speed slots. If you do not c

Our toughest long-range outdoor access point – now with WiFi6! The NetMetal ax is equipped with dual-band WiFi6, 1G ETH port and 2.5G SFP port. With an IP66 certification and a durable design, it is one of the manufac

Condition: Unboxed device that is 100% functional. hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable

hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry abo