Accessories
ODR-SXT-5HPnD-Hexagonal - Anti-interference shield for SXT series
Odrušovač pro MikroTik produktovou řadu SXT v Hexagonal provedení snižuje nežádoucí interferenční rušení ze zadní strany a z bočních stran. Ochraňuje signál jen v žádoucí oblasti. Odrušovač spolu se zadním krytem nezvyšuje zisk antény ani nemění vyzařo...
MikroTik Sleeve 30 Kit - radom with collar for mANT30
The Sleeve30 kit for mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces
MikroTik 24V Power Adapter (24V/0,8A) for RouterBOARD, ALIX - 18POW
Original MikroTik power adapter with direct installation in a socket with a standard 5.5 / 2.1mm connector designed for powering, for example MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 19W and
MikroTik Passive PoE adapter
Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead
MikroTik Power Adapter 5V 1A for MikroTik hAP mini, hAP lite, cAP lite
MikroTik power adapter with 5V voltage, maximum current 1A, max. Power 5W and microUSB connector. This power source is suitable, for example, for MikroTik hAP mini, hAP lite and cAP lite.
MikroTik MMCX-RPSMA pigtail
Cable reduction from MMCX to RSMA female, 26 cm long, intended for the frequency band from 2 to 6 GHz. The MMCX connector is angled and the RSMA female is straight. This is a high-quality connection, e.g. in BaseBox2 or BaseBox5 devic
MikroTik CWDM-MUX8A, CWDM MUX/DEMUX module for 8 route
The CWDM is a passive MUX/DEMUX unit, which allows to combine up to eight fiber links into one, to simplify and reduce the cost of long distance fiber installations. At the other location, the combined line is split back up again, so that instead of ei
MikroTik CWDM-CHASSIS-2, Rackmount chassis bracket for CWDM-MUX8A, 1U
The MikroTik CWDM-CHASSIS-2 is a metal 1U chassis made for 19" data cabinet with two slots for 8-port MUX / DEMUX modules (CWDM-MUX8A).
MikroTik DRP-LTM - DINrail PRO kit for LtAP mini series
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment ra
MikroTik PW48V-12V85W Power source for CCR1036 r2, 12V, 85W
±48 V DC telecom Open Frame Power supply with 12 V 8 A output, for use with new “r2” revision of Cloud Core Routers. Simply remove one of the current power supplies and replace with the new PW48V-12V85W for -48 V installations. Compatibility
MikroTik GPEN11 Gigabit Fixed PoE injector
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. MikroTik GPEN The GPEN11 is part of the GPEN (Giga
MikroTik RMK-2/10 - 1U rack mount kit
Rackmount kit RMK-2/10 allows the installation of two smaller MikroTik devices with a width of 200mm in traditional 19 inch data cabinets. Alternatively, you can permanently remove the longer part from both brackets and install only o
Accessories
Nabízíme vám nejen profesionální zařízení, ale i drobné doplňky, které vám pomohou při ochraně a instalaci vybavení nebo k plnému využití a rozšíření. V nabídce můžete vybírat RF kabel, USB injektor, MikroTik pasivní gigabit PoE adaptér s LED indikací, odrušovací kryty pro SXT,?Hot Swap napájecí zdroje, radom pro parabolické antény, ale i řadu dalšího příslušenství. Výrobce MikroTik garantuje vysokou kvalitu zpracování i relativně drobných částí. Garantuje a zvyšuje tak spolehlivost celého vybavení a plnou spokojenost i velmi náročným klientům.